There are a number of benefits to paver sealing. One of these is color enhancement. There are a variety of different sealers on the market, including enhanced and wet looks. While these products do not actually change the brick color, they can help to enhance it. If you’re looking for more tips, AAA Paver Sealing of Orlando has it for you. Here’s a quick primer on paver sealing. This will help you get the best possible results. Here are some steps to follow to prepare your pavers for sealing.

 

The first thing you should do when paver sealing is determine the type of sealer you’re using. If you’re applying water-based sealer to a previously sealed surface, you’ll need to know which type was used. The best way to determine this is by using an efflorescence cleaner. During the application process, you should avoid applying anything that could cause overspray. Lastly, ensure that you’re working in a well-ventilated area.

Before applying the sealer, you should test it by pouring some Xylene onto a small corner of your paver. Once it’s dry, wipe it away to check if it is sticking. If it doesn’t, choose a different type of sealer. Two-part water-based polyurethane is best because it’s tougher and won’t yellow. A water-based sealer is more resistant to chemicals than solvent-based ones.

Using efflorescence cleaner is another way to improve your pavers’ appearance. It works to clean out the pavers’ pores, allowing the sealer to penetrate deeper into them. The process will also allow the product to perform optimally, extending the life of the project. Efflorescence cleaner is an important part of paver sealing, so don’t skip this step! If you want to seal your pavers in a professional manner, be sure to consult your paver manufacturer’s specifications.

Regardless of what type of sealant you choose, pavers should be clean and dry before sealing. If they aren’t, it will likely stain them. You should also avoid mixing solvent-based sealants with water. If you’re unsure, use a sprayer or a roller to ensure that the surface is dry. It’s also important to wait a couple of weeks before sealing to allow the pavers to settle.

Efflorescence is a temporary problem that can affect all types of concrete products. The solution to efflorescence is to allow the concrete to breathe. If you seal your pavers prematurely, the migrated salts will be trapped within the sealant. If you wait for it to go away, you may have a real problem. If you seal prematurely, the salts will stay trapped and remain permanently. To solve this, you must strip the sealant and reapply it.

Penetrating sealers are non-film-forming. They form an invisible layer of protection and increase surface tension. They also repel water and prevent weeds from growing between the stones. The best part about penetrating sealers is that they won’t affect the color of the pavers, and one quart will cover an area of 1,000 square feet. If you’re interested in paver sealing, make sure to contact a professional.

Contact Info

AAA Paver Sealing
159 Palmyra Dr
Orlando, Florida, 32807
Phone No. : (407) 392-0888