If you want to install Artificial Grass in your yard, you must know how to cut and lay the turf properly. The first step is cutting the turf by folding it backwards and making small outward relief cuts. The cuts should be made using sharp blades to be clean and to fit around corners and angles. Then, you should apply 2-3mm of glue on the grass. After that, you can start installing the base material of the grass. You may want to check out Artificial Grass & Paver Pros paver contractors for more.

The sub-base is a layer beneath the artificial grass that has a lot of impact on the entire installation. You may never see the sub-base, but you will feel its effects for years to come. Depending on the type of gravel and sand, you can use a mixture of both. The gravel and sand must be damp enough to pack tightly during the compaction process. This will prevent weeds from growing in the artificial grass. It will also act as a solid backing for the nails.
When installing Artificial Grass, you must first clean the area. You can do this by hand or by using a mechanical turf cutter. Remember to make sure that the base layer is not built on top of soil or organics. Also, the base layer should not be higher than the final grass line. If you are installing Artificial Grass in a patio or deck, you can use timber edging as an alternative. It is recommended that you use a weed barrier to prevent invasive weeds from destroying the artificial grass.
To start the installation process, you must lay a layer of sand or granite dust on the area you would like to cover. After this, you should spread the sand or granite dust on the area to ensure even coverage. Then, use a push broom to spread the infill. If the area is large, use a power bristle brush. A regular broom should be adequate. As you work on the infill, make sure to fluff the artificial grass blades to match the texture of natural grass.
Another factor to consider when choosing an Artificial Grass installation company is the quality of the base material. A good backing material is made of durable materials like polyurethane or latex. It is important to consider how durable the product is and whether it is safe for the environment. Some people prefer to use artificial grass with a softer backing. They can make a nice putting green. If you are looking for a high-quality artificial grass, you should look for a company that provides a lifetime warranty.
In addition to the base material, you must also buy some artificial grass installation supplies. Artificial grass installation requires a shovel, broom, ground cover fabric, weed suppressor, and a landscape pin. You should also use weed barrier fabric and geotextile to ensure that the grass is well-drained. Then, you should cut the turf, using landscape pins or stakes. Now, it is time to install the artificial grass.